Two Piece Adjustable Manual
The two piece adjustable manual has 5" of slot adjustment at the motor mounting bracket and 1-1/2" of adjustment at the transom bracket. After height adjustment has been made, tighten the four bolts on the sides to 100 foot pounds to hold the position in place. . Available in:

5-1/2 inch set-back (PN: 55012)
2 piece manual adjustable
Shipping weight approximately 26 lbs
$189

4 inch set-back (PN: 40012)
2 piece manual adjustable
Shipping weight approximately 23 lbs
$189

7 inch Static Set-back Plate
The 7 inch static set-back plate has 1-1/2" of adjustment at the transom bracket and 1" of adjustment on the motor bracket. It is available with 4 degrees of positive or negative trim. It also can be purchased with no trim angle.

7 inch Static Set-back Plate (PN: 70012)
Shipping weight approximately 35 lbs
$319

9 inch Static Set-back Plate
The 9 inch static set-back plate also has 1-1/2 inches of adjustment at the transom and one inch of adjustment on the motor bracket.

9 inch Static Set-back Plate (PN: 90012)
Shipping weight approximately 32 lbs
$319